Apple's propriety watch band adapters are quick and easy to replace. There is no need to take it into the shop and paying a jeweler to do a 2 minute job. To replace your adapters just follow our easy to follow guide below (with pictures) by Anhem:
Step 1: To remove your adapter, locate your adapter at the end of the strap. Locate the 2 screws on either end of the adapter.
Step 2: With your included screwdriver, remove these two screws to release the adapter.
Step 3: Separate the adapter from the handle bars.
Step 4: The handlebars separate into two pieces. Remove these pieces. To install your new classic adapters, just simply follow the instructions in reverse!
Simple as that, and shouldn't take you more than 5 minutes to do. Enjoy the new look of your adapters! If you would like to purchase some new replacement adapters, Anhem currently offers Black and Silver adapters in both 38mm and 42mm sizing.