Step 1:
This watch band has spring loaded rods. Do not press too hard or the spring rods will get jammed. Push in gently with the tool until there is resistance, then you can slide the end of the link out.
Step 2:
Once you have slid out out side, you can repeat the process on the other side of the band to completely disconnect the band. Repeat these steps until you have removed as many links as necessary to fit your wrist.
Step 3:
Is the band still too long or your wrist is inbetween sizes? Our titanium band comes with half link sizes for a more precise fitment. The red arrow in the image points to the half link which you can remove. The blue arrow points to an additional hole that you can move your band into to make the watch band just a tiny bit smaller. Your watch band will come with the band connected to the outside hole, but you can use the tool to remove the band and move it to the inner hole to make your band roughly 5mm shorter.
